Beginner video editing tutorial adobe premiere pro cc 2015 free

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Then click on Ok. All the symbols and tools might be overwhelming to see at first glance but I assure you, as you will keep working on it, you will come to revere and love this version of your workplace.

As you can see there are four main panels each serving a different purpose. You can, of course, at any time, change the workspace depending upon your needs. For starters, we will let defaults be defaults. Step 3: Time to import some media to get things going. That is basically a representation of your hard drive and will reflect any folder you wish to add there. Double click on the panel. It will open an Import dialog box.

You can specifically add a video to be imported through there. Alternatively just drag and drop the folder or video you wish to add into that panel, that will do the trick as well. Step 4: So I went ahead and dragged and dropped my folder into the panel. Once you double click the folder you will get something like this:.

It is known as the bin and is useful in displaying all your videos in the form of thumbnails so you get a better insight at the videos you wish to add. You can choose to delete videos from the bin too by selecting them and pressing the delete button. When you do, you will notice that the video automatically opens in your Source panel located on the left side. You can choose to close the bin it can be opened again by a mere double click on the folder so chill!

One of the most basic things to do in a video is to get only a portion of it for your movie. You would be required to remove the unrequired bits and focus on what you need at a lot of junctures. Using that marker click on the part from where you wish to begin the trimming. It will set a marker In point. Figured that out? Timeline is the place where your actual editing will be taken care of.

It will be recording the stuff you do with your video and audio, will help you assemble other pieces of video and audio to perform other video editing stuff. In your case, it might have an Audio timeline too. The most basic way to trim a clip is using the drag method. It would also point where you can push your clip to trim. The other way to trim a video is via using Razor Tool.

It is a blade symbol attached alongside timeline. Then make necessary cuts or incisions on your video clip. I have made four of them as you can see. Then move around the clips by dragging and dropping them where you wish to put them. You can check how the whole clip would appear by pressing the Spacebar button to play your clips in the Program Panel.

You might remember transitions from Powerpoint or from a cool movie wherein when a frame changes from one form to another it appears to fade in or fade out. There are tons of transition effects available in Premiere Pro, and goes without saying that it is one of those interesting steps of learning How to Use Adobe Premiere Pro CC It will use the default transition of Fading and place it at the beginning or ending of the video clip you have selected.

You will notice a small button created like this on either side of the video clip you have selected. Step 2: Go ahead and repeat Step 1 for all your video clips so that each transition from one video to another has a Fading effect. Step 3: Now run the video using backspace in the program panel and you will see the difference.

NOTE: In order to delete the effects, you can simply click on the button like structure and then press delete. Yes, there are tons of effects that come with the software. Step 2: Navigate to the part that says Video Transitions. Select any preferred transition effect and drag and drop to your clip. Step 3: Press Play and check out how the transition appears on your video clips. There are many gorgeous transitions. Go ahead and play around with them.

Step 1: Drag your video and audio by selecting them and moving across the timeline to incorporate some space for the title clip. You know, just making things cool. Notice the editing area provided to you. It has all the cool fonts that you can use to press out a cool title. As you can see there are four main panels each serving a different purpose. You can, of course, at any time, change the workspace depending upon your needs.

For starters, we will let defaults be defaults. Step 3: Time to import some media to get things going. That is basically a representation of your hard drive and will reflect any folder you wish to add there. Double click on the panel.

It will open an Import dialog box. You can specifically add a video to be imported through there. Alternatively just drag and drop the folder or video you wish to add into that panel, that will do the trick as well. Step 4: So I went ahead and dragged and dropped my folder into the panel.

Once you double click the folder you will get something like this:. It is known as the bin and is useful in displaying all your videos in the form of thumbnails so you get a better insight at the videos you wish to add. You can choose to delete videos from the bin too by selecting them and pressing the delete button. When you do, you will notice that the video automatically opens in your Source panel located on the left side.

You can choose to close the bin it can be opened again by a mere double click on the folder so chill! One of the most basic things to do in a video is to get only a portion of it for your movie. You would be required to remove the unrequired bits and focus on what you need at a lot of junctures. Using that marker click on the part from where you wish to begin the trimming.

It will set a marker In point. Figured that out? Timeline is the place where your actual editing will be taken care of. It will be recording the stuff you do with your video and audio, will help you assemble other pieces of video and audio to perform other video editing stuff. In your case, it might have an Audio timeline too. The most basic way to trim a clip is using the drag method.

It would also point where you can push your clip to trim. The other way to trim a video is via using Razor Tool. It is a blade symbol attached alongside timeline. Then make necessary cuts or incisions on your video clip. I have made four of them as you can see. Then move around the clips by dragging and dropping them where you wish to put them. You can check how the whole clip would appear by pressing the Spacebar button to play your clips in the Program Panel. You might remember transitions from Powerpoint or from a cool movie wherein when a frame changes from one form to another it appears to fade in or fade out.

There are tons of transition effects available in Premiere Pro, and goes without saying that it is one of those interesting steps of learning How to Use Adobe Premiere Pro CC It will use the default transition of Fading and place it at the beginning or ending of the video clip you have selected. You will notice a small button created like this on either side of the video clip you have selected.

Step 2: Go ahead and repeat Step 1 for all your video clips so that each transition from one video to another has a Fading effect. Step 3: Now run the video using backspace in the program panel and you will see the difference. NOTE: In order to delete the effects, you can simply click on the button like structure and then press delete. Yes, there are tons of effects that come with the software. Step 2: Navigate to the part that says Video Transitions. Select any preferred transition effect and drag and drop to your clip.

Step 3: Press Play and check out how the transition appears on your video clips. There are many gorgeous transitions. Go ahead and play around with them. Step 1: Drag your video and audio by selecting them and moving across the timeline to incorporate some space for the title clip. You know, just making things cool. Notice the editing area provided to you. It has all the cool fonts that you can use to press out a cool title. I am gonna keep things simple for now. Step 4: Type in whatever title you wish to type.

Under Project Auto Save , you can choose where the auto saved files will be stored. The easiest way to do this is to connect your memory card to your computer using a card reader, and drag and drop the contents into a folder that will contain both your project file and video files onto the computer or external hard drive.

You should not edit the AVCHD folder or any files within this folder, or you risk corrupting the video footage. It is necessary to import your media into Premiere so you can begin editing.

A finder window will open, and you can select the folder or individual files you want to import. You can view the files that are available on your computer or external hard drive and import them into Premiere.

Video files will appear as icons showing the first scene from the clip. You can also adjust the slider at the bottom to increase the size of the icons, and click on the three horizontal lines to sort by name, filetype, etc. This, in conjunction with zooming on thumbnail view, offers an easy way to scrub through your videos and preview your clips.

Double click on a file to preview it in the Source pane, located directly above the Project pane. This does not import the file, but allows you to play the clip, and scrub through it in a larger view. Premiere Pro CC will import the file and it will appear in the Project pane.

You can also copy files from a media card to your computer and import them into Premiere in one action using the Media Browser. This will copy media from your card to your computer, and import all at once. Adobe Media Encoder must be installed to import files this way. To start, in the top bar of the Media Browser, select the checkbox labeled Ingest.

Then click the wrench next to the Ingest checkbox to verify your settings. The Project Settings window will open to the tab called Ingest Settings. Primary Destination: Defines the location where the files will be copied.

By default, the files will be placed in the same folder as your project file. Click OK to save your settings. Navigate to locate your card using the Media Browser tab.

Your media card should be under Local Drives. You can toggle the arrow to find the specific card you want to import files from. Right click on the file or folder you wish to import, and select Import from the menu options.

The media files will be copied from the card to your project file, and imported into your project. Another program called Adobe Media Encoder will open and show you a progress bar as the files are being copied, but you can ignore this and start editing immediately. There are multiple ways to use the Undo function.

Navigate to the horizontal menu bar at the top of the page, right click Edit and select Undo from the menu. In order to edit the footage you imported, navigate out of the Media Browser, to the Project tab in the Project pane. Double check that you are working in the Project pane and not the Media Browser. You can change how you view your footage- in a list or as icons you can scrub through -by selecting between two buttons in the bottom left of the Project pane.

You can view clips in the Source pane for a larger preview. Double click on a clip, or click and drag it onto the source monitor to preview. Once a clip has been loaded in the Source pane, you can use the buttons on the bottom, or the space bar on your keyboard to playback or pause the video. You can drag it left or right to scrub forward or backward in the clip. J will rewind, K will pause, and L will play the clip forward. Clicking J or L multiple times will speed up playback forwards or backwards.

Before you start editing, you need to create a sequence. A sequence is a container for all of your edits. Sequences are organized and accessed in the Project pane and edited in the Timeline.

You can have multiple sequences in one project, or do all of your editing inside one sequence, it just depends on how you work. To create a new sequence, navigate to the horizontal menu at the top of the screen. You can change settings here to match the video format for the camera you used for this project. This setting matches the resolution and frame rate we use with the Sony x70 camera. To create custom settings, open the Settings tab, located to the right of the Sequence Presets tab.

Click the Save Preset button in the bottom left of the window. A new window will open, prompting you to name your preset. Name the preset and click OK.

Your preset will be available in the Sequence Presets tab, within the Custom folder at the bottom of the list of Available Presets. You can use your custom preset for future projects where you are editing video from the same camera. Premiere Pro CC will do this automatically when you drag a video clip from your Project pane into the Timeline. It may only appear after you drag a clip into the Timeline from the project window or source monitor.

You can add a clip to a sequence in the Timeline by dragging it from Source pane on the top left of the screen, down to the Timeline pane on the lower right. Alternatively, you can drag and drop video footage from the Project pane directly into the timeline. Drag the clip to the V1 video track on the timeline and release. Drag the icon that looks like an audio waveform, which appears just below the preview on the Source pane, to the audio tracks in the timeline.

Grab the icons just below the preview on the Source pane that appears like a film strip, and drag it to the video track of the timeline. You can also highlight a portion of the video as you preview it in the Source pane, to drag a selection into the timeline, rather than an entire video clip.

Click where you would like to begin the selection using the blue playhead. The area you have selected will be highlighted in the Source pane. Drag and drop the selection into the Timeline pane to edit. The timeline is where you will do your editing and build your final video. Video clips appear as horizontal bars in the timeline. Those in the upper half Lines marked V1, V2, V3 etc. Those in the lower half A1, A2, A3 etc are audio content.

The thin vertical blue line is the playhead, and it shows your position in the timeline. When the playhead is over a video clip, the video will appear in the program pane above. For example, one video track will cover another. You can only view the top video clip in the Program pane. They play backwards, pause, and forward, respectively. Zooming in and out on the clip allows you to view the seconds or minutes more closely, and edit your footage more precisely.

You can move video clips around in the timeline by clicking and dragging them up, down, left or right. You can shorten clips by clicking on the edge of a clip and dragging it in. When you hover your cursor over the clip, a red arrow will appear. Click and drag inward to shorten the clip to the desired length.

You can also lengthen a clip by clicking on the edge and dragging it out to the right. If you have a clip with both video and audio tracks, and you want to change one track without affecting the other such as deleting the audio track , you can unlink them. To separate audio from video, click the Linked Selection button, which has an image of a mouse cursor over two bars. You now can move the video and audio track clips independently of each other.

For example, holding Alt will let you click and only select one audio track from a linked pair. The Snap icon looks like a U-shaped magnet, and should be highlighted blue if it is on, and white when it is turned off. You can also click S on your keyboard to turn it on and off. The razor tools is ideal for editing longer clips, like interview segments. You can bring the entire clip into the timeline and use the razor tool to make cuts to the clip. For a shortcut, you can also press C on your keyboard.

Your cursor will change to a small razor icon while you are using this tool. Click on the video clip at the point where you want to cut it. Or cut the clip multiple times to create a segment in the middle that you can remove.

You can make shorter selections from video clips while they are displayed in the Source pane to simplify editing before you bring clips into the timeline. You can select only the best parts of the clip to bring into the timeline, so you can edit out any unnecessary footage.

 
 

Beginner video editing tutorial adobe premiere pro cc 2015 free. How to Use Adobe Premiere Pro CC 2015 | Video Editing Tutorial

 
Step 5: Just double click on the video you wish to add. You can hover your cursor over the number in the right column to move the image up or down. Finally, open the sequence in the existing project and copy the clips from the imported sequence into the timeline.

 

– Adobe Premiere Pro | Tutorial | Berkeley Advanced Media Institute

 
Doing so will open the project dialog box. Premiere Pro CC will do this automatically when you drag a video clip from your Project pane into the Timeline. To hide the video from a particular track in the timeline:. This will zoom your image in or out. You can specifically add a video to be imported through there. CSS Selectors 4.

 
 

16 Adobe Premiere Pro CC Tutorials for Beginners.How to Use Adobe Premiere Pro CC | Video Editing Tutorial

 
 
Video Intermediate ML It will be recording the stuff you do with adobf video and audio, will help you assemble other pieces of video and audio to perform other video editing stuff. Find Number of Frames 9. Wait Commands 8. Recommended Recent Posts Popular Posts.