KB—Netjoin: Domain join hardening changes – Microsoft Support – Where to find the Netsetup.log file

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Spice 2 flag Report. I think I actually had the issue once but reformatted the drive before got the info flag Report. Well, it either isn’t locating the domain or something is blocking it. You will have to verify your resource records.

Open a command prompt and input the following Text. If you have the client using DNS of your domain controller and still cannot find the domain, can you confirm the IP and subnet mask are correct and on a live network Can the machine ping its own gateway? Will the server process normal A record lookups?

Pinging a website on the server gives me a time out. AceOfSpades This person is a verified professional. Is the computer on the same subnet? Any VLANs? ProgramOne This person is a verified professional.

Work around for DNS issues. Regards, Michael Spice 1 flag Report. Regards, Michael He said he already tried this flag Report. Brad-S-Russell This person is a verified professional.

Ryan Anderson. John This person is a verified professional. On a long shot What is the AD forest level? Windows 10 will not join a Windows forest. TLWiz This person is a verified professional. Do you have any network connectivity at all? My first steps would be: Confirm basic networking. Stan This person is a verified professional. Can you ping the domain name?

MSchaller This person is a verified professional. And do what Stan said about changing the name prior to joining domain. Eric This person is a verified professional. Gdawg82 This person is a verified professional. MarkT94 This person is a verified professional. Alex Fogerty This person is a verified professional. As a local admin, can you ping the domain DNS server? Hey OP. Did you mean:. Sign In. New Contributor. This is happening in all Windows 10 machines which newly built. Is it something known to Microsoft?

Kindly help on this. PP created using Windows Imaging and configuration designer. Anyone have any solution to it. I’m having the same problem. The helper domain controller responds but the joining client considers the response incomplete. After receiving the same replies from all domain controllers located using DNS, it falls back to performing a NetBIOS name query for the FQDN domain name to locate a domain controller, however this gets no response and the join operation fails.

However it receives no adequate response and fails with the second error. Skip to main content. Cancel Submit. Jessen P. Hi Bruce, Since the error pertains to joining the active directory domain with Windows 10 Pro, the issue is out of our support boundary. Thank you. Thanks for your feedback. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site.

 
 

 

Why can’t Windows home editions connect to domains? – Super User

 

Healthcare and Life Sciences. Small and Medium Business. Internet of Things IoT. Azure Partner Community. Microsoft Tech Talks.

MVP Award Program. Video Hub Azure. Microsoft Business. Microsoft Enterprise. Upgrade to Microsoft Edge to take advantage of the latest features, security updates, and technical support.

When trying to join the Windows Server R2 machine to the domain by specifying the fully qualified domain name FQDN in the domain join UI, the operation fails and you receive the error:. The specified domain either does not exist or could not be contacted. Domain joins using the FQDN also fail. If the issue persists, verify the status of the DC that the client is connecting to active connections, network connectivity, and so on.

You may want to restart the DC if the issue persists. Make sure that you have the most up-to-date drivers installed for the client computer’s network adapter. Verify connectivity between the client that is being joined and the target DC over the required ports and protocols. Verify that Active Directory is replicating between all DCs. You can use the following command to detect any errors:. The following articles contain port requirement information: Service overview and network port requirements for Windows How to configure a firewall for domains and trusts.

The name will remain “. The specified server cannot perform the operation. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Make sure that you have permissions to add computers to the domain, and that you have not exceeded the quota that is defined by your Domain Administrator.

To join a computer to the domain, the user account must be granted Create computer object permissions in Active Directory. For joining Domain issues sometimes the NetworkID wizard solves it.

Try running that. Also as others have suggested, try the FQDN. Spice 3 flag Report. We had an issue with a PC that wouldn’t join, in the end we did this: Open a Command prompt “As Administrator” run netsh winsock reset Reboot and try again.

Seems a bit obscure but it worked. Spice 5 flag Report. John This person is a verified professional. Any AV? Try disabling if so Spice 2 flag Report. I reset the security on the system and than I was able to add it to the domain.

Try creating the computer account in AD first, then joining. Daz This person is a verified professional. Go to: Settings System About Connect to work or school Connect This will bring up a box that allows you to join the domain. That should do it!! Good Luck!! Matt Davidson. New contributor pimiento.

Had similar issues Add-Computer -DomainName “yourdomain. Arthur Maloney This person is a verified professional. I’ve encountered this on Win XP and Win 7 machines. A few things to check here. Good luck! Disable IPv6. MDuwady This person is a verified professional. I have had this issue a lot, with different OS. Verify the time on the problem machine and the time on the domain controllers are the same.

Brad-S-Russell This person is a verified professional. Rana This person is a verified professional. Is the time correct on the client you are trying to join? John Vance.

 
 

Windows 10 enterprise unable to join domain free –

 
 

Been struggling to add a Windows 10 Pro machine with full windows 10 enterprise unable to join domain free to our domain. I have done a nslookup and it returns the dc full name and the correct IP address. We etnerprise a lot of other devices on the DC’s – I have also done a restart of both DC’s to see if it windows 10 enterprise unable to join domain free any affect, both are updated and all other devices are able to authenticate with them without a glitch.

Servers are Windows R2 Standard – Fully patched up. I actually added another server to that same DC’s this morning with no issue. The domain is also set to the highest functional level.

Fireside Office Solutions is an IT service provider. Note: This information is intended for a network administrator. DNS was successfully queried for the service location SRV resource record used to locate a domain controller for domain “intelli. Common causes of this error include: fnterprise Host A or AAAA records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses.

On the computermake sure it enterprie off windows 10 enterprise unable to join domain free domain and the dns has been flushed. The PC should have the same name as computer account. Example: DC1. Had Windows 10 fail to join our domain yesterday. Windows domai didn’t have a problem with joining using “DomainName”, but Windows 10 failed until we used “DomainName. Try using a static IP address that is somewhat close in proximity to your DC. Also try disabling IPv4 or IPv6 whichever isn’t in use temporarily.

After you are able to join domain then change back to DHCP with all protocols turned on. I have had it happen on a few of my machines and this seems to resolve it. I occasionally have the problem where it balks on the domain name itself. On windows 10 enterprise unable to join domain free occassion I have seen it want xyz on others xyz.

Has this system been on the domain before? I had a system that would not join the domain no matter what I tried. My first Windows 10 computer had issues joining the domain. This will be yourdomain. I was going to suggest the Hosts file as well, but I’ve domin seen something similar with a single user on Windows 7 at my previous employer who couldn’t access network shares a couple of minutes to a few hours after she logged in. Don’t remember the specific events in the logs, but a DC couldn’t be found.

For her, I could take the box out of the domain, then join successfully, but shortly thereafter the problem came back. I finally gave her a new box but kept hers around without reimaging to see if I could solve the solution.

Although I had a DC synching with an external time server, this box was synching with a different source and the time was off by several minutes. Once I set time at the command prompt, the problem went away. What I have found is that you need to join the domain from “Settings” in Windows The old way from system properties like we did in Windows 7 just doesn’t work. This will bring up a box that allows you to join the domain. It will also as if you want a standard or administrator account.

I had a similar issue after installing an AV application that wasn’t for enterprise use. Removed it and joined the domain without a problem. I have known it to want the FQDN so yourdomain.

Also try via Powershell Not sure if anyone has mentioned this, I’ve had machines refuse to join a domain and it’s been because the time was wrong, might be worth having a check.

I’ve had to disable one or the other at times in order to get otherwise simple communication to work. If you have an AntiVirus already installed try turning it off. Also turn off Windows Firewall or any other firewall you have on the box. You’d be surprised how often Windows Firewall blocks joining a Windows Domain.

I find things go easier when you are. If you are windows 10 enterprise unable to join domain free to use Wifi to join the domain it sometimes can cause errors. Make sure when setting the domain name you use the full FQDN such as domain. If that doesn’t work, try using Powershell to unabe it to the domain. Our domain is called xyz. When I try windows 10 enterprise unable to join domain free join, sometimes I have to give xyz only, and sometimes xyz.

That way it will have the same neterprise everything else does. As soon as we disabled that portion entwrprise AVG then it worked. This will reset all your apapters, WAN Miniports and stuff and you would be able to do it.

I have attached the screenshot of the Status Window. Any other options before I just can this and start a different career altogether? I don’t actually have a suggestion, just wanted to let you know how perfectly you captured what’s become a daily internal struggle for me. I have been fighting with this for a couple weeks on this 1 machine, I have installed 10 others with no issue joim putting ydomain.

This topic has been locked by an administrator and is no longer open for commenting. To continue this discussion, please ask a new question. I manage several M tenants all with Winfows Defaults enabled and in one specific tenant, for some reason, no users including Wndows Admins are able to create a Team directly in the Teams app using the “Join or create a team” option. This option IS Do you take breaks or do you keep going until you complete the 6 steps of debugging?

Today I overcame a, what I thought was a major problem, minor challenge. We just got don Good afternoon and welcome to today’s briefing. Hope you are starting to enjoy the warmer weather up in the north it has been pretty awesome. That said Security doesn’t sleep and so do we have to keep our systems and our knowledge up to date. We have some If you’re unfamiliar with Fun with Flags, it was a video blog series where Sheldon and Am No real budget for this. Online Events. Log in Join. Spice 17 Reply Contest Details View all contests.

Cookie Master. Does the computer name of this Windows 10 machine conflict with anything else on the domain? Spice 9 flag Report. Verify your account to enable IT peers to see that you are a professional. OP mauzilla.

Windows 10 network already on private, have tried disabling the firewall as well with no luck : flag Report. Error when trying to add windows 10 enterprise unable to join domain free DC: Note: This information is intended for a network administrator. Well, “. Spice 2 flag Report. In AD create a computer account On the computermake sure it is off the domain and doman dns has been flushed.

Join the PC to /49356.txt domain with an account that has permissions to do so. Born2Frag This person is a verified professional. Another gotcha that I have seen a few times in the past but doesn’t appear to be your issue: Using the Netbios domain name /26044.txt the DNS name for your domain? I жмите seen joining domains fail when using the domain Netbios name.

When the domain DNS name was used, the system best video editor pc free download join the domain. Spice 4 flag Report. Agreed, try joining with the FQDN. Free 8 flag Report. Spice 1 flag Report. Are you getting any errors in event viewer?

For joining Domain issues sometimes the NetworkID wizard solves узнать больше здесь. Try running that. Also as others have suggested, try the FQDN. Spice нажмите чтобы перейти flag Report. We had an issue with a PC that wouldn’t join, in the end windows 10 enterprise unable to join domain free did this: Open a Command prompt “As Administrator” run netsh winsock reset Reboot and try again.